Identification Plates
Moderator: LCR Members
-
- Learner Driver
- Posts: 59
- Joined: Thu 18th Jan 2018 11:51 am
- LCR Membership Number: 2542
- Location: Aberdeenshire
Identification Plates
Where does the small identification plate (not the vin plate) fit on an airflow mk 1 and what information does it contain? My body shell has had new inner wing tops fitted but I still have the original plate and I need to refit it in the correct position so any info or photos would be great.
-
- COMMITTEE MEMBER
- Posts: 1617
- Joined: Mon 4th Dec 2006 1:00 am
- LCR Membership Number: 1292
Re: Identification Plates
Its the build plate which was attached at the start of the cars construction, it contains the designation code for a Lotus Cortina, whether its RHD or LHD and the consecutive number of the build,Tomtecno wrote:Where does the small identification plate (not the vin plate) fit on an airflow mk 1 and what information does it contain? My body shell has had new inner wing tops fitted but I still have the original plate and I need to refit it in the correct position so any info or photos would be great.
-
- Learner Driver
- Posts: 59
- Joined: Thu 18th Jan 2018 11:51 am
- LCR Membership Number: 2542
- Location: Aberdeenshire
Re: Identification Plates
That’s it Rick, thanks. Can you tell me where it should be placed?
- Keith Halstead
- Moderator
- Posts: 5116
- Joined: Tue 28th Nov 2006 1:00 am
- LCR Membership Number: 1711
- Location: Essex
Re: Identification Plates
It sits on the flat of the top plate on driver's side of the inner wing just behind the bonnet hinge.
You do not have the required permissions to view the files attached to this post.
-
- Learner Driver
- Posts: 59
- Joined: Thu 18th Jan 2018 11:51 am
- LCR Membership Number: 2542
- Location: Aberdeenshire
Re: Identification Plates
Thanks Keith.
Did you post a photo? If so, I can’t open it.
Did you post a photo? If so, I can’t open it.
- Keith Halstead
- Moderator
- Posts: 5116
- Joined: Tue 28th Nov 2006 1:00 am
- LCR Membership Number: 1711
- Location: Essex
Re: Identification Plates
Yes - I'll send an email if you give me an email id.Tomtecno wrote:Thanks Keith.
Did you post a photo? If so, I can’t open it.
-
- Learner Driver
- Posts: 59
- Joined: Thu 18th Jan 2018 11:51 am
- LCR Membership Number: 2542
- Location: Aberdeenshire
- Keith Halstead
- Moderator
- Posts: 5116
- Joined: Tue 28th Nov 2006 1:00 am
- LCR Membership Number: 1711
- Location: Essex
Re: Identification Plates
Done Tom.
-
- Learner Driver
- Posts: 61
- Joined: Tue 2nd Oct 2018 7:59 pm
- LCR Membership Number: 2574
- Location: Calgary Alberta Canada / Phoenix Arizona
Re: Identification Plates
my car also a 66 airflow, has had the inner wings replaced and I don't have the plate , are replacements or repros available .
also while I am at it a lot of the black paint? is missing off my chassis plate and it looks rather scruffy , are replacements available and can they be stamped to look like the originals
thanks dave
also while I am at it a lot of the black paint? is missing off my chassis plate and it looks rather scruffy , are replacements available and can they be stamped to look like the originals
thanks dave
- Keith Halstead
- Moderator
- Posts: 5116
- Joined: Tue 28th Nov 2006 1:00 am
- LCR Membership Number: 1711
- Location: Essex
- David Baldock
- Woodrim
- Posts: 1546
- Joined: Thu 16th Jun 2011 12:00 am
- LCR Membership Number: 57
- Location: East Sussex
Re: Identification Plates
Just my personal opinion but it's 52 years old so what's wrong with it looking a bit scruffy?
Dave B
Dave B
-
- Learner Driver
- Posts: 61
- Joined: Tue 2nd Oct 2018 7:59 pm
- LCR Membership Number: 2574
- Location: Calgary Alberta Canada / Phoenix Arizona
Re: Identification Plates
True I guess I was looking a bit scruffy by the time I reached 52
Dave
Dave
- David Baldock
- Woodrim
- Posts: 1546
- Joined: Thu 16th Jun 2011 12:00 am
- LCR Membership Number: 57
- Location: East Sussex
Re: Identification Plates
Don't be too hard on yourself.
- Keith Halstead
- Moderator
- Posts: 5116
- Joined: Tue 28th Nov 2006 1:00 am
- LCR Membership Number: 1711
- Location: Essex
Re: Identification Plates
Imagine what you could look like after all those years after a spot of nip ' n 'tuck .....David Baldock wrote: ↑Wed 10th Oct 2018 9:14 am Just my personal opinion but it's 52 years old so what's wrong with it looking a bit scruffy?
Dave B
- David Baldock
- Woodrim
- Posts: 1546
- Joined: Thu 16th Jun 2011 12:00 am
- LCR Membership Number: 57
- Location: East Sussex
Re: Identification Plates
I'm way too far past 52 to care Keith.