Lotus Cortina
Moderator: LCR Members
-
- Learner Driver
- Posts: 20
- Joined: Mon 30th Jun 2014 11:24 pm
- LCR Membership Number: 2451
- Location: Las Vegas
- Contact:
Lotus Cortina
The first of many questions!
I took delivery of a 66 Lotus Cortina yesterday and I need to go through the mechanicals before I drive it... it's been off the road for 25 years.
I already have rebuild kits for the brake and clutch systems and a new thermostat and cam cover gasket on the way. I need some recommendations on plugs, oil and filter so please chime in.
Also, and possibly most importantly, how much oil does a Lotus Cortina hold!
Thanks!
John
I took delivery of a 66 Lotus Cortina yesterday and I need to go through the mechanicals before I drive it... it's been off the road for 25 years.
I already have rebuild kits for the brake and clutch systems and a new thermostat and cam cover gasket on the way. I need some recommendations on plugs, oil and filter so please chime in.
Also, and possibly most importantly, how much oil does a Lotus Cortina hold!
Thanks!
John
- Keith Halstead
- Moderator
- Posts: 5120
- Joined: Tue 28th Nov 2006 1:00 am
- LCR Membership Number: 1711
- Location: Essex
Re: Lotus Cortina
Post some pics John - is it a car known to the club?
Plugs - NGK BP6ES
Oil - Valvoline 20/50
Filter - type ?? - paper or canister screw on??
Plugs - NGK BP6ES
Oil - Valvoline 20/50
Filter - type ?? - paper or canister screw on??
-
- Learner Driver
- Posts: 20
- Joined: Mon 30th Jun 2014 11:24 pm
- LCR Membership Number: 2451
- Location: Las Vegas
- Contact:
Re: Lotus Cortina
Screw on filter and don't forget the all importand 'how much oil" question!
I'll give the pictures a shot but I may need a little instruction. Most of the pictures are from the previous owner in Colorado however the picture in the trailer is in front of my office in Las Vegas.
Thanks for the parts advice and with any luck it will be running tonight.
I'll give the pictures a shot but I may need a little instruction. Most of the pictures are from the previous owner in Colorado however the picture in the trailer is in front of my office in Las Vegas.
Thanks for the parts advice and with any luck it will be running tonight.
- David Baldock
- Woodrim
- Posts: 1546
- Joined: Thu 16th Jun 2011 12:00 am
- LCR Membership Number: 57
- Location: East Sussex
Re: Lotus Cortina
That looks a very correct car. You can buy a copy of the handbook from the club which will give you all the basic maintenance info. including oil capacities.
Good luck.
Dave B
Good luck.
Dave B
-
- Learner Driver
- Posts: 97
- Joined: Mon 4th Dec 2006 1:00 am
- LCR Membership Number: 1924
- Location: Melbourne
Re: Lotus Cortina
Great car and good luck.
Other, check out BAT - that's where I first saw this car come up for sale. My car is almost identical condition wise with the exception of a repainted flash. Even the dash cracks look the same
Other, check out BAT - that's where I first saw this car come up for sale. My car is almost identical condition wise with the exception of a repainted flash. Even the dash cracks look the same
- Peter Meyer
- Woodrim
- Posts: 1736
- Joined: Fri 5th Jun 2009 12:00 am
- LCR Membership Number: 2229
- Location: Sydney. Australia
- Contact:
Re: Lotus Cortina
Love BAT!
Bring a trailer if you are not familiar!
Bring a trailer if you are not familiar!
- David Baldock
- Woodrim
- Posts: 1546
- Joined: Thu 16th Jun 2011 12:00 am
- LCR Membership Number: 57
- Location: East Sussex
Re: Lotus Cortina
Hello John,
If you haven't found out yet, sump capacity is 8.4 US pints. If your not aware, make sure you use a mineral based oil that's suitable for our cars. I always use Castrol 'Classic' XL 20/50 but it's very much a personal thing.
Dave B
If you haven't found out yet, sump capacity is 8.4 US pints. If your not aware, make sure you use a mineral based oil that's suitable for our cars. I always use Castrol 'Classic' XL 20/50 but it's very much a personal thing.
Dave B
-
- Regular
- Posts: 127
- Joined: Mon 7th Nov 2011 1:00 am
- LCR Membership Number: 2289
- Contact:
Re: Lotus Cortina
Hi John
Great car
I have its twin sister VIN number 50024, which is only a couple of numbers from yours, the cars must have been made next to each other in the factory
David
Great car
I have its twin sister VIN number 50024, which is only a couple of numbers from yours, the cars must have been made next to each other in the factory
David
- Pete G
- Woodrim
- Posts: 1525
- Joined: Wed 6th Dec 2006 1:00 am
- LCR Membership Number: 278
- Location: W Essex
- Contact:
Re: Lotus Cortina
If it has been stored for that long then gearbox and diff oil should be changed as well.
Also, brake & clutch slave cylinders, calipers, servo and all joints should be checked in case they have seized which will need more than a rebuild kit if there is any corrosion
Also, brake & clutch slave cylinders, calipers, servo and all joints should be checked in case they have seized which will need more than a rebuild kit if there is any corrosion
- Andy M
- COMMITTEE MEMBER
- Posts: 1205
- Joined: Mon 4th Dec 2006 1:00 am
- LCR Membership Number: 896
- Location: North West London
Re: Lotus Cortina
Hi Pete,
Not according to Wayne Carrini on "Chasing Classic Cars". All he ever does is gets his ace mechanic Roger to rebuild the Carburrettor (on every car he finds) and away he goes up the Freeway in a $500,000 classic for a road test!!
The following week its at auction after a polish and it sells for $750,000!
Andy M
Not according to Wayne Carrini on "Chasing Classic Cars". All he ever does is gets his ace mechanic Roger to rebuild the Carburrettor (on every car he finds) and away he goes up the Freeway in a $500,000 classic for a road test!!
The following week its at auction after a polish and it sells for $750,000!
Andy M