Lotus wood steering wheel

Anything related to Lotus Cortinas. (Open to the public.)

Moderator: LCR Members

User avatar
Keith Halstead
Moderator
Posts: 5093
Joined: Tue 28th Nov 2006 1:00 am
LCR Membership Number: 1711
Location: Essex

Post by Keith Halstead »

David Baldock wrote:Hi Simon.

On the first one, if you count the number of 'finger bumps' from spoke to spoke, top half of the wheel, there are fourteen. On Keith's & mine there are twenty three.

Fascinating!

Dave B
Well spotted - that probably means it is a repro then - I saw them for sale years ago and they were a much paler wood.
Simon G
East UK Event Rep
Posts: 765
Joined: Tue 21st Apr 2009 12:00 am
LCR Membership Number: 609

Post by Simon G »

Just counted my 'bumps' and there are indeed twenty three along the top part of the rim. It's interesting that so many different shades of wood were used although I guess exposure to the sun could cause the wood to alter it's appearance.
User avatar
L2Man
Woodrim
Posts: 1261
Joined: Wed 27th May 2009 12:00 am
LCR Membership Number: 2222
Location: Ashford Kent

Post by L2Man »

Keith Halstead wrote:
Simon G wrote:......... Would there really have been two different types of woodrim fitted to LHD and RHD cars?
You need to get used to Brendan's 'sense of humour' Simon . :wink:
Keith, you worry me we are on the same wavelength.............
User avatar
David Baldock
Woodrim
Posts: 1546
Joined: Thu 16th Jun 2011 12:00 am
LCR Membership Number: 57
Location: East Sussex

Post by David Baldock »

Are any of us on the same wavelength?

Dave B
Gerry
Learner Driver
Posts: 5
Joined: Fri 28th Feb 2014 1:52 am
LCR Membership Number: 0
Location: canada

Post by Gerry »

I bought my wheel from the local Ford dealer as an accessory in about 1970 or 71 and added it to my Cortina GT.
It has 14 bumps between the top spokes and 9 beween the bottom ones. The original varnish was quite chipped and worn off. After I stripped it I just oiled it. A new coat of varnish would probably darken it up a bit.
Thanks for your interest. Gerry
User avatar
Peter Meyer
Woodrim
Posts: 1736
Joined: Fri 5th Jun 2009 12:00 am
LCR Membership Number: 2229
Location: Sydney. Australia
Contact:

Post by Peter Meyer »

Its probably not worth 600 pounds. Mine also has 23 bumps. I don't suppose we made Gerry happy. Can't please all the people all the time.......
User avatar
David Baldock
Woodrim
Posts: 1546
Joined: Thu 16th Jun 2011 12:00 am
LCR Membership Number: 57
Location: East Sussex

Post by David Baldock »

It'll be tough knowing what original ones sell for on e-bay (£1000+?) but at least Gerry knows now, so he won't be unknowingly selling it as original.

Dave B
User avatar
Steve 155C
Site Admin
Posts: 3895
Joined: Mon 27th Nov 2006 1:00 am
LCR Membership Number: 2037
Location: West Sussex , UK

Post by Steve 155C »

Gerry wrote:I bought my wheel from the local Ford dealer as an accessory in about 1970 or 71 and added it to my Cortina GT.
It has 14 bumps between the top spokes and 9 beween the bottom ones. The original varnish was quite chipped and worn off. After I stripped it I just oiled it. A new coat of varnish would probably darken it up a bit.
Thanks for your interest. Gerry
Hi Gerry - your steering wheel is probably made by a company called Springall. These where the company that did make the Lotus Cortina steering wheel , but yours was probably made for the aftersales market.

Have a look here:

http://mk1-performance-conversions.co.u ... rchive.htm

If it is a springall it will still be valuable.

We need Len Chandler (forum member "Steering Wheel") to give he's opinion.
User avatar
Keith Halstead
Moderator
Posts: 5093
Joined: Tue 28th Nov 2006 1:00 am
LCR Membership Number: 1711
Location: Essex

Post by Keith Halstead »

Steve 155C wrote:
Gerry wrote:
If it is a springall it will still be valuable.
£300 - £375 then... :wink:
Scott Simpson
The Gearbox Man
Posts: 880
Joined: Mon 4th Dec 2006 1:00 am
LCR Membership Number: 463

Post by Scott Simpson »

Hi All,
Before everyone tells Gerry that his woodrim is not original and he gives it away for nothing, I'd better mention that I have seen loads of Lotus
Cortina and Elan woodrims over the years and have 4 of my own.
I've seen loads of the woodrims with the deeper and fewer grooves, mostly on Elans, or from Elans. I have both types here and can assure you they are original Lotus, springal woodrims. However, I must say that I have never seen the type with less finger grooves on a Cortina, only Elans. My point being, it's not a reproduction and it's worth a fair bit of money. Don't give it away Gerry!
Scott 8)
SteveL

Post by SteveL »

Exactly Scott
I wonder how many pm's hes had

:p
User avatar
David Baldock
Woodrim
Posts: 1546
Joined: Thu 16th Jun 2011 12:00 am
LCR Membership Number: 57
Location: East Sussex

Post by David Baldock »

Good one Scott. He should do well if he can advertise it as a genuine Elan wheel.

Dave B
Scott Simpson
The Gearbox Man
Posts: 880
Joined: Mon 4th Dec 2006 1:00 am
LCR Membership Number: 463

Post by Scott Simpson »

Well yes, a genuine elan woodrim, with a lotus cortina boss!
It really wouldn't look out of place on a Mk1 L/C and if I were Gerry, I'd advertise it as such. Elan guys don't pay as much as L/C guys!!
Good Luck Gerry.
Scott
User avatar
L2Man
Woodrim
Posts: 1261
Joined: Wed 27th May 2009 12:00 am
LCR Membership Number: 2222
Location: Ashford Kent

Post by L2Man »

I just checked my bumps and can only count two....
User avatar
Peter Meyer
Woodrim
Posts: 1736
Joined: Fri 5th Jun 2009 12:00 am
LCR Membership Number: 2229
Location: Sydney. Australia
Contact:

Post by Peter Meyer »

Try counting the fingers 11 time!
Post Reply