Identification Plates

Anything related to Lotus Cortinas. (Open to the public.)

Moderator: LCR Members

Tomtecno
Learner Driver
Posts: 59
Joined: Thu 18th Jan 2018 11:51 am
LCR Membership Number: 2542
Location: Aberdeenshire

Identification Plates

Post by Tomtecno »

Where does the small identification plate (not the vin plate) fit on an airflow mk 1 and what information does it contain? My body shell has had new inner wing tops fitted but I still have the original plate and I need to refit it in the correct position so any info or photos would be great.
Rick
COMMITTEE MEMBER
Posts: 1594
Joined: Mon 4th Dec 2006 1:00 am
LCR Membership Number: 1292

Re: Identification Plates

Post by Rick »

Tomtecno wrote:Where does the small identification plate (not the vin plate) fit on an airflow mk 1 and what information does it contain? My body shell has had new inner wing tops fitted but I still have the original plate and I need to refit it in the correct position so any info or photos would be great.
Its the build plate which was attached at the start of the cars construction, it contains the designation code for a Lotus Cortina, whether its RHD or LHD and the consecutive number of the build,
Tomtecno
Learner Driver
Posts: 59
Joined: Thu 18th Jan 2018 11:51 am
LCR Membership Number: 2542
Location: Aberdeenshire

Re: Identification Plates

Post by Tomtecno »

That’s it Rick, thanks. Can you tell me where it should be placed?
User avatar
Keith Halstead
Moderator
Posts: 5028
Joined: Tue 28th Nov 2006 1:00 am
LCR Membership Number: 1711
Location: Essex

Re: Identification Plates

Post by Keith Halstead »

It sits on the flat of the top plate on driver's side of the inner wing just behind the bonnet hinge.
You do not have the required permissions to view the files attached to this post.
Tomtecno
Learner Driver
Posts: 59
Joined: Thu 18th Jan 2018 11:51 am
LCR Membership Number: 2542
Location: Aberdeenshire

Re: Identification Plates

Post by Tomtecno »

Thanks Keith.

Did you post a photo? If so, I can’t open it.
User avatar
Keith Halstead
Moderator
Posts: 5028
Joined: Tue 28th Nov 2006 1:00 am
LCR Membership Number: 1711
Location: Essex

Re: Identification Plates

Post by Keith Halstead »

Tomtecno wrote:Thanks Keith.

Did you post a photo? If so, I can’t open it.
Yes - I'll send an email if you give me an email id.
Tomtecno
Learner Driver
Posts: 59
Joined: Thu 18th Jan 2018 11:51 am
LCR Membership Number: 2542
Location: Aberdeenshire

Re: Identification Plates

Post by Tomtecno »

Hi Keith,

Email is smpdesign@hotmail.co.uk

Thanks
Tom
User avatar
Keith Halstead
Moderator
Posts: 5028
Joined: Tue 28th Nov 2006 1:00 am
LCR Membership Number: 1711
Location: Essex

Re: Identification Plates

Post by Keith Halstead »

Done Tom.
SilverSpur
Learner Driver
Posts: 59
Joined: Tue 2nd Oct 2018 7:59 pm
LCR Membership Number: 2574
Location: Calgary Alberta Canada / Phoenix Arizona

Re: Identification Plates

Post by SilverSpur »

my car also a 66 airflow, has had the inner wings replaced and I don't have the plate , are replacements or repros available .

also while I am at it a lot of the black paint? is missing off my chassis plate and it looks rather scruffy , are replacements available and can they be stamped to look like the originals

thanks dave
User avatar
Keith Halstead
Moderator
Posts: 5028
Joined: Tue 28th Nov 2006 1:00 am
LCR Membership Number: 1711
Location: Essex

Re: Identification Plates

Post by Keith Halstead »

VIN plates re available from

KEN SKILLERN 01905841296 or Ken1600E@tiscali.co.uk

Image
User avatar
David Baldock
Woodrim
Posts: 1546
Joined: Thu 16th Jun 2011 12:00 am
LCR Membership Number: 57
Location: East Sussex

Re: Identification Plates

Post by David Baldock »

Just my personal opinion but it's 52 years old so what's wrong with it looking a bit scruffy?

Dave B
SilverSpur
Learner Driver
Posts: 59
Joined: Tue 2nd Oct 2018 7:59 pm
LCR Membership Number: 2574
Location: Calgary Alberta Canada / Phoenix Arizona

Re: Identification Plates

Post by SilverSpur »

True I guess I was looking a bit scruffy by the time I reached 52
Dave
User avatar
David Baldock
Woodrim
Posts: 1546
Joined: Thu 16th Jun 2011 12:00 am
LCR Membership Number: 57
Location: East Sussex

Re: Identification Plates

Post by David Baldock »

Don't be too hard on yourself.
User avatar
Keith Halstead
Moderator
Posts: 5028
Joined: Tue 28th Nov 2006 1:00 am
LCR Membership Number: 1711
Location: Essex

Re: Identification Plates

Post by Keith Halstead »

David Baldock wrote: Wed 10th Oct 2018 9:14 am Just my personal opinion but it's 52 years old so what's wrong with it looking a bit scruffy?

Dave B
Imagine what you could look like after all those years after a spot of nip ' n 'tuck ..... :shock:
User avatar
David Baldock
Woodrim
Posts: 1546
Joined: Thu 16th Jun 2011 12:00 am
LCR Membership Number: 57
Location: East Sussex

Re: Identification Plates

Post by David Baldock »

I'm way too far past 52 to care Keith.
Post Reply